Pás de Pickleball OEM Personalizadas

Request a Quote

Browse OEM-Ready Product Bases

Compare current OEM-ready product bases by construction, surface, core and positioning. Use a product as the starting platform, then confirm the custom specification before sampling. If you are researching what OEM means before requesting a quote, read our OEM pickleball paddle guide.

Exibindo 7–12 de 18 resultados

  • Pás de Pickleball com Núcleo de Espuma B2B Fábrica

    Pás de Pickleball com Núcleo de Espuma B2B Fábrica

    Foam-core paddle platform for brands evaluating a more damped impact feel and quieter-play positioning. Comfort, vibration, acoustic behavior, control, power, and compliance depend on the complete finished build and should be validated through sample testing.

    Parâmetro de EspecificaçãoDetalhe / Faixa de Personalização
    Material da FaceT700 Carbon Fiber / 3K Carbon / Fiberglass Composite options
    Material do Núcleo & TecnologiaHigh-density foam-core / 16mm polypropylene-honeycomb options where applicable
    Dimensões (C x L)417x188mm (Elongated) / 400x200mm (Standard) reference sizes
    Faixa de Peso220g–240g / 7.8–8.5 oz reference range; final tolerance is project-specific
    Comprimento do Cabo & Empunhadura127mm–140mm / custom circumference and grip-material options
    Processo de FabricaçãoThermoformed / hot-press routes where applicable
    USA Pickleball PlanningPre-submission and model-specific verification support; internal checks do not grant approval
    MOQ para PersonalizaçãoOrder-specific; confirm after the construction, branding, and packaging brief is defined
    Leia maisConcluído
  • Fábrica de raquetes de pickleball em carbono T700 forjado

    Fábrica de raquetes de pickleball em carbono T700 forjado

    Parâmetro de EspecificaçãoDetalhe / Faixa de Personalização
    Material da FaceFibra de Carbono Toray T700 Crua / T300 Carbono / Fibra de Vidro
    Material do Núcleo & TecnologiaHoneycomb de Polipropileno de 13mm ou 16mm
    Dimensões (C x L)417mm x 188mm (Elongado); Formas Personalizadas Disponíveis
    Faixa de Peso220g – 235g / 7.8 – 8.3 oz
    Comprimento do Cabo & EmpunhaduraComprimento de 139mm (5.5 in) / Circunferência de 108mm (4.25 in)
    Processo de FabricaçãoTermoformado Unibody com Bordas Injetadas de Espuma
    Conformidade com USAPAProjetado para passar nos testes de Tamanho, Rugosidade, COF & Deflexão
    MOQ para PersonalizaçãoEntre em contato com Vendas para Mínimos de Marca Privada

    Leia maisConcluído
  • Gen 3 Pickleball Paddles | Thermoformed OEM Platform

    Gen 3 Pickleball Paddles | Thermoformed OEM Platform

    Gen 3-style thermoformed pickleball paddle construction with carbon-face, foam-edge and private-label options for product-specific OEM programs.

    Leia maisConcluído
  • Fábrica Fornecedora de Raquetes de Pickleball de Alto Nível

    Fábrica Fornecedora de Raquetes de Pickleball de Alto Nível

    Parâmetro de EspecificaçãoDetalhe / Faixa de Personalização
    Material da FaceT700 Raw Carbon Fiber / 3K & 18K Tramas / Fibra de Vidro
    Material do Núcleo & Tecnologia13mm / 16mm / 20mm Polypropylene Honeycomb options
    Dimensões (C x L)417x188mm (Elongado) / 400x200mm (Corpo Largo) / Personalizado
    Faixa de Peso220g–235g / 7.8–8.3 oz; balance target is project-specific
    Comprimento do Cabo & Empunhadura127mm–140mm / 4.0–4.5 in circumference / grip options
    Processo de FabricaçãoUnibody Termoformado / foam-injection or cold-press routes where applicable
    USA Pickleball PlanningPre-submission checks and model-specific verification support; official status applies to the exact submitted brand and model
    MOQ para PersonalizaçãoOrder-specific; confirm after construction, branding, packaging, and quantity split are defined
    Leia maisConcluído
  • Fabricante de Raquetes Térmicas Leves

    Fabricante de Raquetes Térmicas Leves

    Parâmetro de EspecificaçãoDetalhe / Faixa de Personalização
    Material da FaceFibra de Carbono Cru Toray T700 / Carbono 3K / Fibra de Vidro
    Material do Núcleo & TecnologiaColmeia de PP 14mm-16mm com Paredes Injetadas com Espuma
    Dimensões (C x L)417mm x 188mm (Elongado) & outras Formas Personalizadas
    Faixa de Peso220g – 235g / 7.8 – 8.3 oz
    Comprimento do Cabo & Empunhadura135mm – 145mm; Empunhaduras ergonômicas de PU personalizadas
    Processo de FabricaçãoUnibody Termoformando / Moldagem por Prensa Quente
    Conformidade com USAPAPre-submission checks against applicable target parameters; official approval is model-specific
    MOQ para PersonalizaçãoEntre em contato com Vendas para Mínimos de Marca Privada

    Leia maisConcluído
  • Fábrica de pás de pickleball de fibra de carbono OEM

    Fábrica de pás de pickleball de fibra de carbono OEM

    Alto desempenho Raquetes de Fibra de Carbono T700 apresentando uma construção unibody termoformada avançada e núcleos de colmeia de polipropileno de 16mm. Oferecemos serviço completo Serviços de Marca Privada, incluindo impressão UV, distribuição de peso personalizada e Aprovado pela USAPA engenharia para marcas profissionais e vendedores da Amazon.

    Parâmetro de EspecificaçãoDetalhe / Faixa de Personalização
    Material da FaceFibra de Carbono Cru Toray T700 / Trama de Carbono 3K / Híbrido Kevlar-Carbono
    Material do Núcleo & TecnologiaColmeia de Polipropileno (PP) Termoformada de 13mm ou 16mm
    Dimensões (C x L)417mm x 188mm (Elongado); Formas Personalizadas Disponíveis
    Faixa de Peso7.8 – 8.3 oz (220g – 235g); Ponderação Personalizada Disponível
    Comprimento do Cabo & Empunhadura5.5 in (139.7mm) Padrão; Pegada com Almofada Perfurada; 4.25 in de Circunferência
    Processo de FabricaçãoTermoformagem Unibody / Moldagem por Prensa Quente
    Conformidade com USAPAPre-submission checks against applicable target parameters; official approval is model-specific
    MOQ para PersonalizaçãoEntre em contato com Vendas para Mínimos de Marca Privada e OEM

    Leia maisConcluído

MOQ and Project Fit

MOQ follows the manufacturing route and the customization triggers. The final quantity is confirmed against the approved specification, tooling and packaging.

Standard Thermoformed Trials

A lower-MOQ route may be available when the project uses a standard shape, existing tooling, simple artwork and low-complexity packaging. The final MOQ is confirmed against the complete approved specification.

Cold-Press Custom Production

Cold-press and custom production MOQs depend on shape, materials, artwork, packaging, tooling and order complexity. Custom geometry or packaging can increase the threshold, cost or lead time.

Customization Matrix

Performance Specification

Structure: PP honeycomb cold press, thermoformed foam-edge, EPP or EVA plus EPP full foam.

Face: fiberglass, UD, 3K, T700 or T800 carbon and selected hybrid surfaces.

Geometry: standard, widebody, elongated or edgeless shapes, with thickness and handle dimensions confirmed per model.

Brand and Packaging

Branding: artwork, UV print or water-decal routes, grip, edge guard, cap and finish options.

Embalagem: stock box, printed color box, inserts, labels, carton marks and shipment preparation.

Packaging MOQs and any tooling are itemized at quote stage.

Sample, Production and Approval Boundaries

Sample and Production Timing

Sample charges and timing are confirmed after the structure, shape, artwork and packaging scope are locked. Mass-production timing is confirmed after sample approval, artwork approval, tooling readiness and packaging availability.

USAP and UPA-A Support

NexaPaddle can support design review and internal checks for dimensions, surface roughness, coefficient of friction and deflection. Official USAP or UPA-A approval is issued by the relevant body after its own submission and testing process; it is not guaranteed by an internal pre-check.

Five-Stage Manufacturing and QC

Production Flow

1. Design: requirements, engineering, tooling, artwork and packaging.

2. Forming: material preparation, layup, mold preparation and controlled forming.

3. Finishing: sanding, primer, color or print and protective top finish.

4. Assembly: component verification, labels, grip, edge guard and packing.

Batch Release Checks

5. Quality: approved-order sampling, weight, balance, hardness or elasticity, appearance, packaging method and label accuracy.

Acceptance criteria and any batch tolerances should be written into the approved specification before mass production.

What to Send for an Actionable Quote

Share the target market, player segment, expected quantity, target retail tier, preferred construction, shape, artwork, packaging, compliance target and launch date. If some fields are open, ask for two or three structures that fit the same SKU job. Before supplier qualification, review our Supplier Proof & Factory Evidence Hub.
Request a Quote

OEM Buyer FAQ

How is MOQ determined?

MOQ follows the manufacturing route and customization scope. Existing tooling and simpler packaging generally allow more flexibility than new molds, custom structures or specialized packaging. The final quantity is confirmed against the exact specification.

What changes the MOQ or adds tooling?

Custom shapes, size changes, dedicated thermoforming molds, printed color boxes, insert trays, molded logo parts and special edge-guard requirements can change cost, MOQ or timing.

When is the production lead time confirmed?

After the sample, artwork, tooling and packaging path are approved. The quote should separate sample timing, production timing and shipping transit.

Can you guarantee tournament approval?

No factory pre-check replaces official testing. NexaPaddle can support specification review and internal checks, while USAP or UPA-A makes the final approval decision.