Paddle personalizzati OEM per Pickleball

Request a Quote

Browse OEM-Ready Product Bases

Compare current OEM-ready product bases by construction, surface, core and positioning. Use a product as the starting platform, then confirm the custom specification before sampling. If you are researching what OEM means before requesting a quote, read our OEM pickleball paddle guide.

Visualizzazione di 7-12 di 18 risultati

  • Racchette da Pickleball in Schiuma B2B Fabbrica

    Racchette da Pickleball in Schiuma B2B Fabbrica

    Foam-core paddle platform for brands evaluating a more damped impact feel and quieter-play positioning. Comfort, vibration, acoustic behavior, control, power, and compliance depend on the complete finished build and should be validated through sample testing.

    Parametro di SpecificaDettaglio / Gamma di Personalizzazione
    Materiale della FacciaT700 Carbon Fiber / 3K Carbon / Fiberglass Composite options
    Materiale e Tech di BaseHigh-density foam-core / 16mm polypropylene-honeycomb options where applicable
    Dimensioni (L x W)417x188mm (Elongated) / 400x200mm (Standard) reference sizes
    Gamma di Peso220g–240g / 7.8–8.5 oz reference range; final tolerance is project-specific
    Lunghezza Maniglia & Impugnatura127mm–140mm / custom circumference and grip-material options
    Processo di ProduzioneThermoformed / hot-press routes where applicable
    USA Pickleball PlanningPre-submission and model-specific verification support; internal checks do not grant approval
    MOQ per PersonalizzazioneOrder-specific; confirm after the construction, branding, and packaging brief is defined
    Leggi tuttoFatto
  • Fabbrica di racchette da pickleball in carbonio T700 forgiato

    Fabbrica di racchette da pickleball in carbonio T700 forgiato

    Parametro di SpecificaDettaglio / Gamma di Personalizzazione
    Materiale della FacciaFibra di Carbonio Toray T700 Grezza / T300 Carbonio / Fibra di Vetro
    Materiale e Tech di Basenido d'ape in Polipropilene da 13mm o 16mm
    Dimensioni (L x W)417mm x 188mm (Allungato); Forme Personalizzate Disponibile
    Gamma di Peso220g – 235g / 7.8 – 8.3 oz
    Lunghezza Maniglia & ImpugnaturaLunghezza di 139mm (5.5 in) / Circonferenza di 108mm (4.25 in)
    Processo di ProduzioneTermoformati Struttura monoblocco con bordi in schiuma iniettata
    Conformità USAPAProgettato per superare i test di Dimensione, Ruvidezza, COF & Deflessione
    MOQ per PersonalizzazioneContatta le Vendite per Minimi di Etichetta Privata

    Leggi tuttoFatto
  • Gen 3 Pickleball Paddles | Thermoformed OEM Platform

    Gen 3 Pickleball Paddles | Thermoformed OEM Platform

    Gen 3-style thermoformed pickleball paddle construction with carbon-face, foam-edge and private-label options for product-specific OEM programs.

    Leggi tuttoFatto
  • Fornitore di Fabbrica di Racchette da Pickleball di Alta Gamma

    Fornitore di Fabbrica di Racchette da Pickleball di Alta Gamma

    Parametro di SpecificaDettaglio / Gamma di Personalizzazione
    Materiale della FacciaT700 Raw Carbon Fiber / 3K & 18K tessuti / Fibra di vetro
    Materiale e Tech di Base13mm / 16mm / 20mm Polypropylene Honeycomb options
    Dimensioni (L x W)417x188mm (Allungato) / 400x200mm (Corpo largo) / Personalizzato
    Gamma di Peso220g–235g / 7.8–8.3 oz; balance target is project-specific
    Lunghezza Maniglia & Impugnatura127mm–140mm / 4.0–4.5 in circumference / grip options
    Processo di ProduzioneUnibody termoformata / foam-injection or cold-press routes where applicable
    USA Pickleball PlanningPre-submission checks and model-specific verification support; official status applies to the exact submitted brand and model
    MOQ per PersonalizzazioneOrder-specific; confirm after construction, branding, packaging, and quantity split are defined
    Leggi tuttoFatto
  • Produttore di Racchette Termoformate Leggere

    Produttore di Racchette Termoformate Leggere

    Parametro di SpecificaDettaglio / Gamma di Personalizzazione
    Materiale della FacciaFibra di carbonio grezza Toray T700 / Carbonio 3K / Fibra di vetro
    Materiale e Tech di BaseNido d'ape PP 14mm-16mm con Muri iniettati di schiuma
    Dimensioni (L x W)417mm x 188mm (Allungato) e altre forme personalizzate
    Gamma di Peso220g – 235g / 7.8 – 8.3 oz
    Lunghezza Maniglia & Impugnatura135mm – 145mm; Impugnature PU ergonomiche personalizzate
    Processo di ProduzioneUnibody Termoformatura / Stampaggio a caldo
    Conformità USAPAPre-submission checks against applicable target parameters; official approval is model-specific
    MOQ per PersonalizzazioneContatta le Vendite per Minimi di Etichetta Privata

    Leggi tuttoFatto
  • Fabbrica di paddle in fibra di carbonio OEM

    Fabbrica di paddle in fibra di carbonio OEM

    Alta prestazione Racchette in fibra di carbonio T700 caratterizzato da un avanzato design in unibody termoformato e nuclei in polipropilene da 16mm. Offriamo servizi completi di Private Label, inclusa la stampa UV, distribuzione del peso personalizzata e Approvato USAPA ingegneria per marchi professionali e venditori Amazon.

    Parametro di SpecificaDettaglio / Gamma di Personalizzazione
    Materiale della FacciaFibra di carbonio grezza Toray T700 / Tessuto in carbonio 3K / Ibrido Kevlar-Carbon
    Materiale e Tech di BaseNido d'ape in polipropilene (PP) termoformato da 13mm o 16mm
    Dimensioni (L x W)417mm x 188mm (Allungato); forme personalizzate disponibili
    Gamma di Peso7.8 – 8.3 oz (220g – 235g); pesi personalizzati disponibili
    Lunghezza Maniglia & Impugnatura5.5 in (139.7mm) standard; impugnatura imbottita perforata; 4.25 in di circonferenza
    Processo di ProduzioneTermoformatura in unibody / Stampaggio a caldo
    Conformità USAPAPre-submission checks against applicable target parameters; official approval is model-specific
    MOQ per PersonalizzazioneContatta le vendite per i minimi di Private Label e OEM

    Leggi tuttoFatto

MOQ and Project Fit

MOQ follows the manufacturing route and the customization triggers. The final quantity is confirmed against the approved specification, tooling and packaging.

Standard Thermoformed Trials

A lower-MOQ route may be available when the project uses a standard shape, existing tooling, simple artwork and low-complexity packaging. The final MOQ is confirmed against the complete approved specification.

Cold-Press Custom Production

Cold-press and custom production MOQs depend on shape, materials, artwork, packaging, tooling and order complexity. Custom geometry or packaging can increase the threshold, cost or lead time.

Customization Matrix

Performance Specification

Structure: PP honeycomb cold press, thermoformed foam-edge, EPP or EVA plus EPP full foam.

Faccia: fiberglass, UD, 3K, T700 or T800 carbon and selected hybrid surfaces.

Geometry: standard, widebody, elongated or edgeless shapes, with thickness and handle dimensions confirmed per model.

Brand and Packaging

Branding: artwork, UV print or water-decal routes, grip, edge guard, cap and finish options.

Imballaggio: stock box, printed color box, inserts, labels, carton marks and shipment preparation.

Packaging MOQs and any tooling are itemized at quote stage.

Sample, Production and Approval Boundaries

Sample and Production Timing

Sample charges and timing are confirmed after the structure, shape, artwork and packaging scope are locked. Mass-production timing is confirmed after sample approval, artwork approval, tooling readiness and packaging availability.

USAP and UPA-A Support

NexaPaddle can support design review and internal checks for dimensions, surface roughness, coefficient of friction and deflection. Official USAP or UPA-A approval is issued by the relevant body after its own submission and testing process; it is not guaranteed by an internal pre-check.

Five-Stage Manufacturing and QC

Production Flow

1. Design: requirements, engineering, tooling, artwork and packaging.

2. Forming: material preparation, layup, mold preparation and controlled forming.

3. Finishing: sanding, primer, color or print and protective top finish.

4. Assembly: component verification, labels, grip, edge guard and packing.

Batch Release Checks

5. Quality: approved-order sampling, weight, balance, hardness or elasticity, appearance, packaging method and label accuracy.

Acceptance criteria and any batch tolerances should be written into the approved specification before mass production.

What to Send for an Actionable Quote

Share the target market, player segment, expected quantity, target retail tier, preferred construction, shape, artwork, packaging, compliance target and launch date. If some fields are open, ask for two or three structures that fit the same SKU job. Before supplier qualification, review our Supplier Proof & Factory Evidence Hub.
Request a Quote

OEM Buyer FAQ

How is MOQ determined?

MOQ follows the manufacturing route and customization scope. Existing tooling and simpler packaging generally allow more flexibility than new molds, custom structures or specialized packaging. The final quantity is confirmed against the exact specification.

What changes the MOQ or adds tooling?

Custom shapes, size changes, dedicated thermoforming molds, printed color boxes, insert trays, molded logo parts and special edge-guard requirements can change cost, MOQ or timing.

When is the production lead time confirmed?

After the sample, artwork, tooling and packaging path are approved. The quote should separate sample timing, production timing and shipping transit.

Can you guarantee tournament approval?

No factory pre-check replaces official testing. NexaPaddle can support specification review and internal checks, while USAP or UPA-A makes the final approval decision.